AS NZS 14763.2 pdf download

AS NZS 14763.2 pdf download.Information technology — Implementation and operation of customer premises cabling
1 Scope
This part of ISO/IEC 1 4763 specifies requirements for the planning, installation and operation of telecommunications cabling and cabling infrastructures including cabling, pathways, spaces and telecommunications bonds (other than that specified in ISO/IEC 301 29) in support of generic cabling standards and associated documents. The following aspects are addressed: a) specification of the installation; b) quality assurance; c) installation planning; d) installation practice; e) documentation; f) administration; g) testing; h) inspection; i) operation; j) maintenance; k) repair. The requirements and recommendations of Clauses 5 to 1 4 are premises-independent. Annexes C through G contain premises-specific amendments of and additions to these requirements and recommendations. In addition, this document describes the methodology for the assessment of spaces, pathways, pathway systems and cabling (either installed or planned) in support of remote powering objectives. This document excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems may have on the installation of telecommunications cabling (and vice versa) and gives general advice. This document excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite). This document is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances (e.g. electricity supply and electrified railways). Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 1 1 801 -1 , ISO/IEC 1 1 801 -2, ISO/IEC 1 1 801 -3, ISO/IEC 1 1 801 -4, ISO/IEC 1 1 801 -5, ISO/IEC 1 1 801 -6, ISO/IEC 301 29 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: • IEC Electropedia: available at http://www.electropedia.org/ • ISO Online browsing platform: available at http://www.iso.org/obp 3.1.1 acceptance testing <of installed cabling> contractual test to confirm that the installed cabling satisfies specific aspects of its specification 3.1.2 access provider space location of access provider transmission and support equipment 3.1.3 anchor wire tensioned cable designed to add support to structures 3.1.4 automated infrastructure management system AIM system integrated hardware and software system that automatically detects the insertion or removal of cords, documents the cabling infrastructure including connected equipment enabling management of the infrastructure and data exchange with other systems [SOURCE: ISO/IEC 1 8598:201 6, 3.1 .3]3.1.5 cable bundle multiple cables maintained in close proximity, generally by fasteners (e.g. cable ties) 3.1.6 cabinet enclosed construction intended for housing closures and other telecommunications components and equipment 3.1.7 cable management system system used for the support and/or containment, retention, and protection of all types of cables, information and communication lines, electrical power distribution conductors and their associated accessories Note 1 to entry: Includes ducts and tubes housing, or intended to house, blown telecommunications cables and/or cable elements. 3.1.8 cabling component product associated with the cabling installation including cables, connecting hardware, closures, cabinets, frames, racks and pathway systems together with components used to provide bonds to earthing systems 3.1.9 catenary wire dedicated wire used in aerial applications to which telecommunications cables are attached 3.1.1 0 closure fixture or fitting of either open or closed construction intended to contain connecting hardware 3.1.1 1 closed pathway system cable management system which does not allow installation of cables by laying without tensile load 3.1.1 2 electrostatic discharge transfer of electric charge between bodies of different electric potential in proximity or through direct contact [SOURCE: IEC 60050-1 61 :201 4,1 61 -01 -22]