AS ISO 2860 pdf download

AS ISO 2860 pdf download.Earth-moving machinery — Minimum access dimensions
1  Scope
This International Standard specifies the minimum access openings on earth-moving machinery as defined in ISO 6165 for a) hand access, b) head access, c) body access, d) arm access, e) two-handed access. It provides engineers and designers with information in order that the access openings provided on equipment and machinery for purposes of inspection, adjustment and maintenance have sufficient dimensions for the intended function by personnel in the field or shop.
2  Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 3411:1982, Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope. ISO 6165:1987, Earth-moving machinery — Basic types — Vocabulary.
3  Minimum access openings
The dimensions shown in 3.1 to 3.4 are the recommended minimum for limited activity through the opening. Larger openings will be needed in specific instances, depending upon the nature of the task, size and mass of the parts, etc. Such larger openings can be more useful and allow greater efficiency. The larger openings for access with arctic clothing are for earth-moving machines and equipment intended for use in cold environments. Based on available anthropometric data, the recommended openings, in figures 1 to 5, are the smallest that will accommodate the 95th percentile operator as defined in ISO 3411. In all cases in 3.1 to 3.4, all corners may have an optional maximum 25 mm radius. 3.1  Hand access Hand access shall be in accordance with figure 1.