AS 1735.5.4 pdf download

AS 1735.5.4 pdf download

AS 1735.5.4 pdf download.Lifts, escalators and moving walks 1 Scope This Technical Specification is a collection of interpretations related to the EN 115 series. This document collects interpretations to EN 115-1:2008+A1:2010. Interpretations to other standards of the EN 115 series will be added when they are available. Interpretations aim to improve the understanding of the clause(s) they are referring to...

AS 2210.2 pdf download

AS 2210.2 pdf download

AS 2210.2 pdf download.Personal protective equipment 4.1 Sampling The minimum number of samples to be tested in order to check compliance with the requirements specified in ISO 20345, ISO 20347 and any specific job-related footwear standards [e.g. ISO 17249, Safety footwear with resistance to chain saw cutting), together with the minimum number of test pieces taken from each sample, shall...

AS 1742.3 pdf download

AS 1742.3 pdf download

AS 1742.3 pdf download.Manual of uniform trafc control devices 1.1  Scope This Standard specifies the principles relating to the devices for the control of traffic for works on roads. It specifies the traffic control measures and devices to be used to warn, instruct and guide road users in the safe negotiation of work sites on roads including unsealed roads and...

AS 1357.1 pdf download

AS 1357.1 pdf download

AS 1357.1 pdf download.Valves primarily for use in heated water systems 1.3  Terms and definitions For the purpose of this Standard, the definitions given in AS/NZS 3500.0 and those below apply. 1.3.1 auxiliary pressure-relief device pressure-operated device forming part of an expansion control valve, temperature-relief valve or temperature/pressure relief valve, which in the event of blockage of the drain outlet...

AS 2455.1 pdf download

AS 2455.1 pdf download

AS 2455.1 pdf download.Textile foor coverings — Installation practice 1.1  Scope This Standard sets out requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces, together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays. Details of information to be...

AS 1301.014 pdf download

AS 1301.014 pdf download

AS 1301.014 pdf download.Methods of test for pulp and paper 5  Apparatus 5.1  Chip classifier The chip classifier shall be comprised of several screens and a fines pan mounted above each other in a shaking frame in such a way that there is no loss of chips or fines during screening. 5.1.1  Shaking frame The shaking frame may function in...

AS 1289.4.1.1 pdf download

AS 1289.4.1.1 pdf download

AS 1289.4.1.1 pdf download.Methods of testing soils for engineering purposes 3  Reagents The following reagents of analytical reagent (AR) grade shall be used: (a) Potassium dichromate 0.1667M solution Dissolve 49.035 g of potassium dichromate in distilled water and make up to the mark in a 1 L volumetric flask with distilled water. (b) Concentrated sulfuric acid Density 1.84 g/mL. (c)...

AS 1141.52 pdf download

AS 1141.52 pdf download

AS 1141.52 pdf download.Methods for sampling and testing aggregates 4  Apparatus Apparatus conforming to the relevant provisions of AS 1141.2 and the following shall be used: (a) Balance — A balance of sufficient capacity, with a limit of performance not exceeding ±5 g. (b) Base — A flat, rigid foundation on which to compact the specimen; for example, a concrete...

AS 1172.3 pdf download

AS 1172.3 pdf download

AS 1172.3 pdf download.Sanitary plumbing products 1.1  Scope This Standard specifies the requirements for bidets intended for use with douche spray below the rim of the bowl, and to bidettes that can be fitted with over-the-rim taps. Bidets are not suitable for direct connection to the potable water supply as they have a submerged outlet spray unit positioned below the...

AS 1301.402 pdf download

AS 1301.402 pdf download

AS 1301.402 pdf download.Methods of test for pulp and paper 3  Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1 accuracy closeness of agreement between the test result obtained by a particular test system combination of one operator, one apparatus and one laboratory, and the true value of the property being measured for...