AS 4485.2 pdf download
AS 4485.2 pdf download.Security for healthcare facilities 3.4 Assessment of threats 3.4.1 Non-deliberate threats Not all risks which could impact on security will be deliberate or have a criminal connection. Human error, natural hazards outside of the facility’s control and equipment failure are some examples of non- deliberate risks which could impact on the security of a facility. Such matters...
AS 4685.6 pdf download
AS 4685.6 pdf download.Playground equipment and surfacing 1 Scope This document is applicable to rocking equipment which is used as playground equipment for children, as defined in 3.1. Where the main play function is not rocking, the relevant requirements in this document may be used, as appropriate. This document specifies additional safety requirements and test methods for seesaws and rocking...
AS 4934.2 pdf download
AS 4934.2 pdf download.Incandescent Lamps for General Lighting Services 1.1 Scope 1.1.1 General This document specifies requirements for minimum energy performance standards (MEPS), maximum wattage, and other requirements for tungsten filament, tungsten halogen and carbon filament incandescent lamps designed to produce a visible, optical radiation. This document covers lamps as defined in Clause 1.1.2 that are supplied as individual lamps or...
AS 5216 pdf download
AS 5216 pdf download.Design of post-installed and cast-in fastenings in concrete 1.1.1 Scope This document specifies minimum requirements for the design of fastenings used to transmit loads to concrete for safety-critical applications. The fasteners covered in this document are as follows: (a) Post-installed fasteners: (i) Mechanical fasteners (e.g. expansion fasteners, undercut fasteners and concrete screws). (ii) Chemical fasteners (e.g. chemical...
AS 5222 pdf download
AS 5222 pdf download.Cranes — Wind load assessment (ISO 4302:2016, MOD) 1 Scope This International Standard specifies the assessment of wind loads on cranes. It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO...
AS 2758.2 pdf download
AS 2758.2 pdf download.Aggregates and rock for engineering purposes 1 Scope This document provides a basis for specifying requirements for aggregates intended for use in sprayed bituminous surfacing. The requirements relate to quality of rock and other properties of coarse aggregate. A coarse aggregate may be produced from rock, gravel, metallurgical slag or suitable synthetic materials. This document is intended...
AS 2862.1 pdf download
AS 2862.1 pdf download.Copper, lead, zinc and nickel concentrates — Sampling 1 Scope This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the concentrates...
AS 3856.2 pdf download
AS 3856.2 pdf download.Hoists and ramps for people with disabilities — Vehicle fitted 3 Terms and definitions For the purpose of this Standard, the following terms and definitions apply. 3.1 appliance hoist or ramp 3.2 bridge plate cover over the gap between the threshold of the vehicle entry and the edge of the boarding platform Note 1 to entry: The...
AS 1839 pdf download
AS 1839 pdf download.Swimming pools — Premoulded fibre-reinforced plastics — Installation 1.3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 1.3.1 backfill free-draining material or nominated blends of sand and cement 1.3.2 bedding sand or similar free draining material 1.3.3 bond beam structural member that supports the coping 1.3.4 competent person person who...
AS 2809.3 pdf download
AS 2809.3 pdf download.Road tank vehicles for dangerous goods 1 Scope and general 1.1 Scope This Standard specifies requirements for the design, construction, and inspection and testing of road tank vehicles for the transport of compressed liquefied gases by road. This Standard is complementary to AS 2809.1. 1.2 Objective The objective of this Standard is to provide designers, planners, operators...