AS ISO 3452.6 pdf download
AS ISO 3452.6 pdf download.Non-destructive testing — Penetrant testing 3 Low temperature penetrant testing 3.1 General principles The general principles of ISO 3452-1 shall apply unless otherwise stated in this part of ISO 3452 or in the manufacturer’s instructions. Qualification tests are carried out by the manufacturer and if products are used within the stated range, no further tests are...
AS ISO 2860 pdf download
AS ISO 2860 pdf download.Earth-moving machinery — Minimum access dimensions 1 Scope This International Standard specifies the minimum access openings on earth-moving machinery as defined in ISO 6165 for a) hand access, b) head access, c) body access, d) arm access, e) two-handed access. It provides engineers and designers with information in order that the access openings provided on equipment...
AS ISO 3452.3 pdf download
AS ISO 3452.3 pdf download.Non-destructive testing — Penetrant testing 1 Scope This International Standard describes two types of reference blocks: 一Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; . 一 Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast...
AS ISO 3164 pdf download
AS ISO 3164 pdf download.Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection- limiting volume 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 deflection-limiting volume DLV approximation of a large seated operator as defined in ISO 3411 3.1.1 orthogonal DLV DLV (3.1) that is an orthogonal approximation of...
AS ISO 5353 pdf download
AS ISO 5353 pdf download.Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point 3 Definitions For the purposes of this International Standard, the following definitions apply. 3.1 seat index point SIP Point on the central vertical plane of the seat as determined by the device shown in figure 1, when installed in the seat as...
AS ISO 3452.5 pdf download
AS ISO 3452.5 pdf download.Non-destructive testing — Penetrant testing 5 Safety precautions Equipment and testing products shall be handled, stored and used in a safe manner and always in accordance with the manufacturer’s instructions. The viewing conditions required in this part of ISO 3452 are the same as those for the 10 °C up to 50 °C temperature range and...
AS ISO 3452.4 pdf download
AS ISO 3452.4 pdf download.Non-destructive testing — Penetrant testing 5 Equipment for fixed installations 5.1 General requirements All materials of construction used for the manufacture of fixed penetrant inspection installations, e. g. tanks, pipework and ducting, shall be manufactured from materials which are resistant to attack by the products used throughout the complete process. In addition, these materials shall not...
AS ISO 3411 pdf download
AS ISO 3411 pdf download.Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope 1 Scope This International Standard provides the dimensions of operators of earth-moving machinery as defined in ISO 6165 and specifies the minimum normal operating space envelope within the operator enclosures. It is not applicable to machines manufactured prior to the date of its publication....
AS ISO 3449 pdf download
AS ISO 3449 pdf download.Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements 1 Scope This International Standard specifies laboratory tests for measuring the structural characteristics of, and gives performance requirements in a representative test for, falling-object protective structures (FOPS) intended for use on ride-on earth-moving machines as defined in ISO 6165. It is applicable to both...
AS ISO 4993 pdf download
AS ISO 4993 pdf download.Steel and iron castings — Radiographic testing 1 Scope This International Standard specifies the general requirements for the radiography of steel and iron castings by means of X-rays or gamma-rays, in accordance with procedures given in ISO 5579 and ISO 19232. 2 Normative references The following documents, in whole or in part, are normatively referenced in...