AS 3862 pdf download
AS 3862 pdf download.External fusion-bonded epoxy coating for steel pipes 1.1 Scope This Standard specifies requirements and methods of test for external fusion-bonded epoxy (FBE) coating of steel pipes for protection against corrosion. This Standard covers both single-layer and multi-layer coating systems. NOTE 1 Guidelines to purchasers on information that should be supplied by the purchaser and those variables that...
AS 4428.16 pdf download
AS 4428.16 pdf download.Fire detection, warning, control and intercom systems — Control and indicating equipment 1 Scope This Standard specifies requirements, test methods and performance criteria for emergency warning control and indicating equipment (EWCIE) as the main component of an emergency warning system (EWS). This Standard covers three Grades of EWCIE to suit different risks and regulatory requirements. The additional...
AS 3992 pdf download
AS 3992 pdf download.Pressure equipment—Welding and brazing qualification 1.1.1 Scope This Standard specifies requirements for the qualification of welding and brazing procedures, welders and brazers, and requirements for production weld testing other than non-destructive examination, when used in the manufacture, alteration and repair of boilers, pressure vessels, pressure piping and their components as specified in AS/NZS 1200, AS 1210, AS...
AS 2885.5 pdf download
AS 2885.5 pdf download.Pipelines — Gas and liquid petroleum 1.1 Scope and exclusions 1.1.1 General This document sets out methods for the pressure testing of petroleum pipelines constructed of steel, designed in accordance with AS/NZS 2885.1, and operated in accordance with AS 2885.3. It may also be used for testing other pipelines, including pipelines designed or operated in accordance with...
AS 4100 pdf download
AS 4100 pdf download.Steel structures 1.1 Scope and exclusions 1.1.1 Scope This Standard sets out minimum requirements for the design and the engineering aspects of fabrication and erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel. NOTE For design of box and longitudinally...
AS 2341.18 pdf download
AS 2341.18 pdf download.Methods of testing bitumen and related roadmaking products 1 Scope The objective of the Test Method is to set out two procedures which use a ring and ball apparatus for the determination of the softening point of bitumens and related roadmaking products. The materials concerned have a softening point in the range 30 °C to 157 °C....
AS 2341.26 pdf download
AS 2341.26 pdf download.Methods of testing bitumen and related roadmaking products 1 Scope This document sets out a method for determining the quantity of coarse particles in a bituminous emulsion sample that is retained on a specified sieve. It is applicable for use with conventional bituminous emulsions, high binder content bituminous emulsions and polymer modified bituminous emulsions that have sieve...
AS 1141.11.1 pdf download
AS 1141.11.1 pdf download.Methods for sampling and testing aggregates 1 Scope This document sets out the method for the determination of particle size distribution in coarse and fine aggregates by sieving. The amount passing a 75 μm sieve may be determined using AS 1141.12 or by the method given in this document when samples are washed over a 75 μm...
AS 2758.5 pdf download
AS 2758.5 pdf download.Aggregates and rock for engineering purposes 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. NOTE Documents referenced for informative purposes are listed in the Bibliography. AS 1141.3.1, Methods for sampling and testing aggregates, Method 3.1: Sampling—Aggregates AS...
AS 1289.6.6.1 pdf download
AS 1289.6.6.1 pdf download.Methods of testing soils for engineering purposes 1 Scope This Method describes a procedure for determining the rate and magnitude of consolidation of soil when it is restrained laterally and loaded and drained axially, using either manual loading or automated equipment. The Method gives the most reliable results when used on saturated clay soils, which the consolidation...