AS 4024.3201 pdf download
AS 4024.3201 pdf download.Safety of machinery 1 Scope This European Standard covers essential health and safety requirements for the design of blow moulding machines for the processing of plastics. The significant hazards inherent in blow moulding machines are listed in Clause 4. This European Standard does not cover dip blow moulding machines. This European Standard does not cover hazards due...
AS 5013.13 pdf download
AS 5013.13 pdf download.Food microbiology 5 Principle 5.1 Non-selective pre-enrichment in BPW A test portion is inoculated into BPW, then incubated between 34 °C and 38°C for 18h+2 h. NOTE Cronobacter spp. can be present in small numbers accompanied by other Enterobacteriaceae such as E. cloacae that could interfere with their detection. 5.2 Enrichment in a selective medium (CSB) The...
AS 4617 pdf download
AS 4617 pdf download.Manually operated gas valves 2.1 MATERIALS 2.1.1 Continuity of satisfactory operation Materials used in the construction shall be such that continuity of safe and satisfactory operation can be expected during normal usage within the manufacturer’s specification. 2.1.2 Suitability of materials for conditions of use Materials and finishes, including dressings and lubricants, used in the construction, shall be...
AS 3610.1 pdf download
AS 3610.1 pdf download.Formwork for concrete 1.1 SCOPE This Standard sets out- (a) the requirements for the documentation of architectural, structural and construction information necessary for formwork design and construction; (b) architectural requirements and procedures covering the specification of the quality, tolerance, colour, and evaluation of off-form or as-repaired in situ or precast concrete surfaces; and (c) structural requirements that-...
AS 4024.3406 pdf download
AS 4024.3406 pdf download.Safety of machinery 3 Terms and definitions For the purposes of this document the terms and definitions given in Clause 3 of EN ISO 12100:2010, and EN 415-1:2000+A1:2009 and the following apply. 3.1 Definition of terms 3.1.1 product article or articles, with or without pallet, that are handled in the pallet wrapping machine 3.1.2 pack assembly of...
AS 1141.54 pdf download
AS 1141.54 pdf download.Methods for sampling and testing aggregates 1 SCOPE This Standard sets out the method for determining by visual examination the amount of foreign material in coarse aggregate produced from recycled concrete aggregate. The method is appropriate for material up to 75 mm nominal size and tests that fraction of the material retained on the 4.75 mm sieve....
AS 1141.34 pdf download
AS 1141.34 pdf download.Methods for sampling and testing aggregates 2 Principle The test relies on the reaction of humus material with a sodium hydroxide solution to produce a dark colour in the liquid the intensity of which is approximately proportionate with the mass content of humus in the fine aggregate. Based on 1917 research, fine aggregate with humus contents that...
AS 1012.14 pdf download
AS 1012.14 pdf download.Methods of testing concrete 3 DEFINITIONS For the purpose of this Standard, the definitions below apply. 3.1 Authority A body or bodies having jurisdiction over the hardened concrete or concrete structure to be cored. 3.2 Designer The person, persons or organization responsible for the design of the structure. 3.3 Location A region of concrete that is being...
AS 1141.19 pdf download
AS 1141.19 pdf download.Methods for sampling and testing aggregates 1 Scope This Standard sets out the method for the determination of the fine particle size distribution in road materials. The procedure for the determination of coarse particle size distribution and particle size distribution for fillers for asphalt is described in AS 1141.11.1. WARNING — THE STANDARD PROCEDURE FOR THE DETERMINATION...
AS 1603.13 pdf download
AS 1603.13 pdf download.Automatic fre detection and alarm systems 1.1 Scope This Standard specifies performance of duct sampling equipment (DSE) comprising an AS 7240 series smoke detector and duct sampling housing. 1.2 Application This Standard applies to DSEs intended for installation in accordance with AS 1670.1. Where the duct sampling housing is part of duct sampling equipment conforming to one...