SAE AS 4536D pdf download
SAE AS 4536D pdf download.Safety Cable Kit Procurement Specification and Requirement for Use 1. SCOPE 1.1 Purpose This procurement specification covers aerospace quality safety cable kits consisting of safety cables and ferrules made from the same corrosion and heat resistant steels and a nickel base alloy of the type identified under the Unified Numbering System as follows: a. UNS S30400...
SAE AS 1072F pdf download
SAE AS 1072F pdf download.Sleeve, Hose Assembly, Fire Protection 1. SCOPE: This standard defines the requirements for bulk protective sleeve to provide fire resistance for aircraft hose assemblies, which will enable these assemblies to meet the requirements of AS1055. NOTE: Use of this sleeve does not eliminate the need to demonstrate that the sleeved assemblies will meet the applicable requirements...
SAE AS 81934C pdf download
SAE AS 81934C pdf download.(R) Bearings, Sleeve, Plain and Flanged, Self-Lubricating 3. REQUIREMENTS 3.1 Aerospace Standard (AS) Sheets The individual item requirements shall be as specified herein and in accordance with the applicable AS sheets. In the event of any conflict between the requirements of this standard and the AS sheet, the latter shall govern. 3.2 Qualification Products furnished under...
SAE AS 8026B pdf download
SAE AS 8026B pdf download.Crewmember Demand Oxygen Mask for Transport Category Aircraft 1. SCOPE This standard covers oxygen masks and breathing valves used with both panel mounted and mask mounted demand and pressure-demand oxygen regulators. Mask mounted oxygen regulators are covered under other standards, but when the mask mounted regulator incorporates an integral exhalation valve, the performance of this valve...
SAE AS 6286-2A pdf download
SAE AS 6286-2A pdf download.Equipment 1. SCOPE 1.1 Field of Application This document shall be used in conjunction with: – AS6286, Training and Qualification Program for Deicing/Anti-icing of Aircraft on the Ground – AS6286/1, Methods – AS6286/3, Fluids – AS6286/4, Weather – AS6286/5, Health, Safety and First Aid – AS6286/6, Aircraft Deicing/Anti-icing Diagrams, No-Spray-Zones 2. REFERENCES 2.1 Applicable Documents Refer...
SAE AS 5942 pdf download
SAE AS 5942 pdf download.Marking of Electrical Insulating Materials 1. SCOPE: 1.1 This specification establishes the performance requirements for the identification of wire and cable by indirect markings that have been applied to electrical insulating materials including heat shrink sleeving, wrap around labels and “tie-on” tags as well as any other types of materials used for indirect marking. This specification...
SAE AS 5553C pdf download
SAE AS 5553C pdf download.(R) Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation, and Disposition 2.3 Related Definitions AUTHORIZED AFTERMARKET MANUFACTURER: A manufacturer that meets one or more of the following criteria: a. The manufacturer is authorized by the OCM to produce and sell replacement EEE parts, usually due to an OCM decision to discontinue production of an...
AS NZS 60598.2.17 pdf download
AS NZS 60598.2.17 pdf download.Luminaires 17.1 Scope This part of IEC 60598-2 specifies requirements for stage, television, film and photographic studio luminaires (including spot and floodlighting projectors) for use outdoors and indoors, with electric light sources on supply voltages not exceeding 1 000 V. NOTE A hanger (stirrup) is a part of the luminaire . Supporting devices such as tripods,...
AS NZS ISO 5817 pdf download
AS NZS ISO 5817 pdf download.Welding—Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) – Quality levels for imperfections 1 Scope This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles can also be applied to partial-penetration butt welds. (Quality levels for beam welded joints in steel are presented in ISO 13919-1.)...
AS NZS 62061 pdf download
AS NZS 62061 pdf download.Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005+AMD1: 2012+ AMD2: 2015 CSV (ED.1.2)/COR1: 2015 MOD) 1 Scope This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and...