AS 11801.5 pdf download

AS 11801.5 pdf download

AS 11801.5 pdf download.Information technology — Generic cabling for customer premises 1 Scope This part of ISO/IEC 1 1 801 specifies generic cabling within and to the computer room spaces of data centre premises, or data centre spaces within other types of buildings. It covers balanced cabling and optical fibre cabling. This document is optimized for premises in which the...

AS 62040.1 pdf download

AS 62040.1 pdf download

AS 62040.1 pdf download.Uninterruptible power systems (UPS) 1 Scope This part of IEC 62040 applies to movable, stationary, fixed or built-in UPS for use in low- voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with...

AS ISO 12232 pdf download

AS ISO 12232 pdf download

AS ISO 12232 pdf download.Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index 3  Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available...

AS ISO 20954.1 pdf download

AS ISO 20954.1 pdf download

AS ISO 20954.1 pdf download.Digital cameras — Measurement for image stabilization performance 1  Scope This document defines the measurement method of optical image stabilization performance for still images compensating for handheld blur consisting of two rotational components, yaw and pitch. It applies to consumer digital cameras with optical image stabilization for still images. Apparatuses such as camcorders and mobile phones...

AS 11801.6 pdf download

AS 11801.6 pdf download

AS 11801.6 pdf download.Information technology — Generic cabling for customer premises 1 Scope This part of ISO/IEC 1 1 801 specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling. This document has been prepared to reflect the increasing use of generic cabling in support of non-user specific...

AS 5006.2 pdf download

AS 5006.2 pdf download

AS 5006.2 pdf download.Silver and silver bearing alloys 1  Scope This Standard sets out gravimetric procedures for the determination of silver content in the range 1 % to 99 % in silver and silver bearing alloys with < 2 % nickel, < 0.05 % rhodium, < 0.05 % tungsten, < 1 % platinum and < 3 % palladium. NOTE 1 ...

AS 4439.3 pdf download

AS 4439.3 pdf download

AS 4439.3 pdf download.Wastes, sediments and contaminated soils 1 Scope This Standard provides a method for the preparation of leachates from liquid and solid wastes, sediments, sludges and soils for assessing the potential of non-volatile inorganic and semi-volatile organic contamination of groundwater, in a variety of disposal-to-land scenarios. This Standard deals only with the preparation of the leachate. This Standard...

AS 5006.1 pdf download

AS 5006.1 pdf download

AS 5006.1 pdf download.Silver and silver bearing alloys 1  Scope This Standard sets out a titrimetric procedure for the determination of silver content in silver and silver bearing alloys in the range 0.1 % to 99.9 % silver with < 20 % gold and platinum group metals. If palladium or tungsten are present they need to be complexed. This method...

AS 3011.2 pdf download

AS 3011.2 pdf download

AS 3011.2 pdf download.Electrical installations — Secondary batteries installed in buildings 1.1  Scope This Standard sets out requirements for the installation of sealed lead-acid and sealed alkaline secondary batteries with a nominal voltage exceeding 24 V d.c. and a capacity exceeding 10 A.h at the 1 h rate of discharge, permanently installed in buildings, structures or premises. This Standard applies...

AS 2622 pdf download

AS 2622 pdf download

AS 2622 pdf download.Textile products — Fibre content labelling 1  Scope This Standard sets out two methods for designating the fibre content of textile products and for supplying this information on made-up products, piece goods and yarns. It also specifies the methods to be used for determining the fibre content of a product. This Standard is applicable to all textile...