AS 1528.1 pdf download
AS 1528.1 pdf download.Stainless steel tubes and tube fttings for food processing and hygienic applications 8 Dimensions and tolerances 8.1 Outside diameter and wall thickness Nominal outside diameter and wall thicknesses for standard sizes are shown in Table 1. Tube diameter tolerances shall be those specified in Table 1 and wall thickness tolerance shall be ±10 % of nominal wall...
AS 1528.3 pdf download
AS 1528.3 pdf download.Stainless steel tubes and tube fttings for food processing and hygienic applications 1 Scope This Standard specifies dimensional, material and hygienic requirements for butt weld tubular fittings including bends, tees, reducers, y-sections and crosses, for incorporation in tube lines for food processing and hygienic applications. The fittings in this Standard are intended to be incorporated in tube...
AS 1141.35 pdf download
AS 1141.35 pdf download.Methods for sampling and testing aggregates 1 SCOPE This Standard sets out a qualitative method for the detection of sugar in aggregates intended for use in the production of concrete. A positive reaction is given by one part of sugar in one thousand parts of aggregates. No visible reaction is given by one part of sugar in...
AS 1141.26 pdf download
AS 1141.26 pdf download.Methods for sampling and testing aggregates 1 Scope This Method sets out the method for determining the content of secondary or deuteric minerals of rock spalls, bore cores and aggregates of igneous rocks using a petrological microscope. This Method is not applicable to rocks that have developed a clearly identifiable metamorphic texture or mineral assemblage, or to...
AS 1528.4 pdf download
AS 1528.4 pdf download.Stainless steel tubes and tube fttings for food processing and hygienic applications 1 Scope This Standard specifies requirements for welded-type and expanded-type clamp tube fittings, comprising clamps, clamp liners (ferrules), end caps and gaskets in tube couplings for effecting joins in pipelines in food processing and hygienic applications. Requirements for materials, dimensions, and surface finish are specified....
AS 2455.2 pdf download
AS 2455.2 pdf download.Textile foor coverings — Installation practice 1 Scope This Standard specifies requirements and procedures for the installation of square carpet tiles. NOTE It is recognized that not all carpet tiles will be able to be installed in accordance with this Standard. Manufacturers’ instructions, particularly regarding shaped carpet tiles, may vary from these requirements and where this occurs,...
AS 1735.19 pdf download
AS 1735.19 pdf download.Lifts, escalators and moving walks 1 Scope This European Standard applies to alarm systems for all types of passenger and goods passenger lifts, in particular those covered in the EN 81 series. This European Standard also deals with the minimum information to be provided as part of the instruction manual related to maintenance and the rescue service....
AS 1735.5.3 pdf download
AS 1735.5.3 pdf download.Lifts, escalators and moving walks 1 Scope This Technical Report applies to escalators and moving walks built in accordance with EN 115-1:2017. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the...
AS 1735.5.2 pdf download
AS 1735.5.2 pdf download.Lifts, escalators and moving walks 1 Scope 1.1 This European Standard gives rules for improving the safety of existing escalators and moving walks with the aim of reaching an equivalent level of safety to that of a newly installed escalator and moving walk by the application of today’s state of the art for safety. NOTE Due to...
AS 1528.2 pdf download
AS 1528.2 pdf download.Stainless steel tubes and tube fttings for food processing and hygienic applications 1.1 Scope This Standard specifies requirements for all screwed tube fitting types intended for food processing and hygienic applications. This includes ring-joint types, and trapezoidal thread (ISO type) stainless steel screwed couplings. The male parts and the liners are intended for use with the stainless...