AS 5235.1 pdf download
AS 5235.1 pdf download.Cranes — Information labels 1 Scope This part of ISO 9942 specifies the minimum requirements for labels for the identification (marking) and the operation of cranes. 2 Identification data 2.1 Manufacturer’s data As a minimum, the following information shall figure permanently on every crane: — name of the supplier; — name of the manufacturer; — year of...
AS 1289.4.3.1 pdf download
AS 1289.4.3.1 pdf download.Methods of testing soils for engineering purposes 4 Apparatus The following apparatus are required: (a) pH meter, covering at least the range pH 3.0 to pH 13.0, fitted with a scale that is readable and accurate to 0.05 pH units. NOTE 1 Soils with high pH values, such as stabilized soils and naturally occurring soils with a...
AS ISO 6302 pdf download
AS ISO 6302 pdf download.Earth-moving machinery — Drain, fill and level plugs 1 Scope This International Standard establishes the types, shapes and sizes of the parts of the plugs used in connection with the hand tools listed in ISO 4510-1 to permit easy removal and installation of plugs at the work-site. It does not set requirements, i.e. dimensions and materials,...
AS ISO 6015 pdf download
AS ISO 6015 pdf download.Earth-moving machinery — Hydraulic excavators and backhoe loaders — Methods of determining tool forces 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 tool force force generated at the bucket lip or cutting edge, but not at the tips of the teeth, when operating the bucket or arm...
AS 1301.405 pdf download
AS 1301.405 pdf download.Methods of test for pulp and paper 5 Apparatus 5.1 Cutting device, capable of repeatedly cleanly cutting test pieces to within ±1,0 % of the same nominal area, for most paper and board products. This shall be checked frequently by measurement. Provided that the above accuracy is attained, the nominal area shall be used for calculating grammage....
AS 5229.1 pdf download
AS 5229.1 pdf download.Cranes — Tolerances for wheels and travel and traversing tracks 1 Scope This part of ISO 12488 specifes tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defned in ISO 4306-1. The purpose of the requirements in this part of ISO 12488 is to promote safe operation and achievement of the expected...
AS 7240.13 pdf download
AS 7240.13 pdf download.Fire detection and alarm systems 1 Scope This document specifies the requirements for compatibility and connectability assessment of the components of fire detection and alarm systems, fire protection systems and voice alarm systems. This document only includes system requirements when these are necessary for compatibility assessment. This document also specifies requirements for the integrity of the fire...
AS IEC 62217 pdf download
AS IEC 62217 pdf download.Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria 1 Scope and object This International Standard is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this standard include both solid core and hollow insulators. They are intended for use...
AS 5341 pdf download
AS 5341 pdf download.LED lamps — Test methods — Energy and functional performance 1.1 Scope This document specifies the test methods and conditions for inorganic light emitting diode (LED) lamps, including non-directional and directional lamps, for residential, commercial and industrial applications in Australia and New Zealand. This document applies to those lamps intended to replace general service, decorative, reflector incandescent...
AS 13100 pdf download
AS 13100 pdf download.AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations A Class I Design Change shall be classified and documented when any significant design factor needs to be changed outside of specified limits or specified tolerances, including, but not limited to, the following elements, e.g., safety, performance, including thermodynamic and mechanical performance (i.e., durability), reliability,...