AS 2317.1 pdf download
AS 2317.1 pdf download.Lifting points 3.1 Type testing of mechanical properties 3.1.1 General Each design shall conform to the requirements of Clause 2.4. NOTE 1 The test of each design is known as the type test, which determines the adequacy of the design for achieving the required performance. NOTE 2 Each change in manufacturing process, grade of material, design, and...
AS 22915.9 pdf download
AS 22915.9 pdf download.Industrial trucks—Verifcation of stability 1 Scope This part of ISO 22915 specifies the tests for verifying the stability of counterbalanced trucks with masts when handling empty or laden freight containers of 6 m (20 ft) length and longer. It is applicable to these types of industrial trucks that are equipped with forks, a spreader, (top lift and...
AS 62052.11 pdf download
AS 62052.11 pdf download.Electricity metering equipment (ac)— General requirements, tests and test conditions 1 Scope This part of IEC 62052 covers type tests for electricity metering equipment for indoor and outdoor application and applies to newly manufactured equipment designed to measure the electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V. It applies...
AS 60601.2.20 pdf download
AS 60601.2.20 pdf download.Medical electrical equipment 201 .1 .1 Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT TRANSPORT INCUBATOR equipment, as defined in 201 .3.21 1 of this standard, also referred to as ME EQUIPMENT . If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to...
AS 5144.2 pdf download
AS 5144.2 pdf download.Industrial trucks—Safety requirements and verifcation 1 Scope This part of ISO 3691 gives safety requirements and the means for their verification for self‑propelled industrial variable‑reach trucks and variable‑reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load‑handling devices for normal industrial duties (e.g. fork arms or means,...
AS 7240.7 pdf download
AS 7240.7 pdf download.Fire detection and alarm systems 1 Scope This document specifies requirements, test methods and performance criteria for point‑type smoke detectors that operate using scattered light, transmitted light or ionization, for use in fire detection and alarm systems installed in buildings (see ISO 7240‑1). This document also covers point‑type smoke detectors that incorporate more than one smoke sensor...
AS 7240.22 pdf download
AS 7240.22 pdf download.Fire detection and alarm systems 1 Scope This document specifies requirements, test methods and performance criteria for smoke-detection equipment for ducts (SDED) for use in fire detection and alarm systems installed in buildings (see ISO 7240-1). The SDED samples the air from a duct and detects smoke in the sample. NOTE 1 A common method of operation...
AS 7240.12 pdf download
AS 7240.12 pdf download.Fire detection and alarm systems 1 Scope 1.1 This part of ISO 7240 specifies requirements, test methods and performance criteria for line-type smoke detectors for use in fire detection systems installed in buildings. The detectors consist of at least a transmitter and a receiver and can include reflector(s), for the detection of smoke by the attenuation and/or...
AS 5159.1 pdf download
AS 5159.1 pdf download.Trampoline park facilities 1.1 SCOPE This Standard specifies the minimum requirements for the design, operation, maintenance and inspection of trampoline park facilities (TPF). This Standard is applicable for indoor, outdoor and mobile trampoline park facilities and related equipment associated with a TPF. This Standard includes supervision levels, staff and patron training, competencies, information, maintenance and testing of...
AS 7240.2 pdf download
AS 7240.2 pdf download.Fire Detection and Alarm Systems 4 Requirements 4.1 General 4.1.1 FDCIE shall have provision for grouping the signals from points to provide zonal indications. 4.1.2 The processing of signals shall give the highest priority to the indication of fire alarms. 4.1.3 FDCIE shall be capable of unambiguously indicating the following functional conditions, in accordance with 4.3 to...