AS 3891.2 pdf download
AS 3891.2 pdf download.Air navigation—Cables and their supporting structures—Marking and safety requirements 1.1 Scope This Standard specifies requirements for marking of overhead cables and their supporting structures for visual warnings to pilots of aircraft involved in planned legal low-level aviation operations. Typical aviation operations within the scope of this Standard include aerial application, firefighting, mustering, emergency services response, power line...
AS 2891.14.15 pdf download
AS 2891.14.15 pdf download.Methods of sampling and testing asphalt 1 SCOPE This Standard sets out the method for calculating the mean, the unbiased standard deviation, coefficient of variation and characteristic values of a set of test results. These values are most commonly specified for density ratio and per cent air voids determined in accordance with AS/NZS 2891.14.5 but may also...
AS 4688.1 pdf download
AS 4688.1 pdf download.Furniture—Fixed height chairs 1 Scope This Standard sets out the safety and general requirements, and recommendations, for freestanding, fixed height seating with either fixed, swivel or rocking bases and upright, reclined or reclinable backs, intended to seat one or more persons. Bases may incorporate wheels, castors or glides. The following are not covered by this Standard: (a)...
AS 3583.6 pdf download
AS 3583.6 pdf download.Methods of test for supplementary cementitious materials 1 SCOPE This Standard sets out the reference method for determining the relative water requirement and two methods, one the standard test and the other an accelerated test, for determining the strength index of fly ash and slag only. Both properties are determined by comparing results for a test sample...
AS 2890.2 pdf download
AS 2890.2 pdf download.Parking facilities 1.1 Scope This Standard specifies minimum requirements for the layout of off-street facilities for the loading and unloading of commercial vehicles, including design requirements for access driveways across the property boundary and for internal circulation roadways. It provides for a variety of standard design vehicle sizes and configurations. NOTE State and local government regulations, by-laws...
AS 3816 pdf download
AS 3816 pdf download.Management of clinical and related wastes This Standard sets out requirements for the safe identification, segregation, handling, storage, transport, treatment and disposal of clinical and related wastes which may be hazardous to the environment or human health and safety. Examples are wastes arising from activities such as medical, dental, podiatry and veterinary practice, pathology and pharmaceutical laboratories,...
AS 3533.4.1 pdf download
AS 3533.4.1 pdf download.Amusement rides and devices 1 SCOPE This Standard sets out requirements and guidance for the design, manufacture, operation and maintenance of land-borne inflatable amusement devices that are static when in use. It also specifies information to be supplied with the equipment. NOTE: This Standard is not applicable to inflatable toys, water-borne inflatable devices, air-supported buildings to which...
AS 4670 pdf download
AS 4670 pdf download.Commercial propane and commercial butane for heating purposes 1 Scope and general 1.1 Scope This Standard specifies requirements for liquefied petroleum gas (LP Gas) products in the liquid phase as supplied for general domestic and industrial fuel purposes, in bulk and into cylinders. The requirements apply to the liquid phase at the point of custody transfer. This...
AS 4722 pdf download
AS 4722 pdf download.Passenger ropeways and passenger conveyors 3 DEFINITIONS For the purposes of this Standard, the definitions below apply. 3.1 Competent person A person who has acquired through training, qualifications or experience, or a combination of these, the knowledge and skills enabling that person to perform a specified task. 3.2 Counterweight rope A rope that is used to impart...
AS 4156.1.1 pdf download
AS 4156.1.1 pdf download.Coal preparation 2.1 Sample mass Samples for float and sink testing shall be obtained and prepared according to the requirements of relevant Standards (AS 2519, AS 2617, ISO 13909 series) and relevant sections of this Standard. The sampling requirements stated in this Standard shall take precedence. For samples undergoing float and sink testing, the mass of the...