API Publication 4740 pdf download
API Publication 4740 pdf download.A Decsion-maker’s Guide to In- situ Burning During a response to an oil spill, in many cases there are several federal agencies as well as state and local agencies from the affected area that become involved with the response efforts. The Incident Command System (ICS) is a response tool that has been almost universally adopted by...
API Std 1104 pdf download
API Std 1104 pdf download.Welding of Pipelines and Related Facilities 1.1 SCOPE This standard covers the gas and arc welding of butt, fillet, and socket welds in carbon and low-alloy steel piping used in the compression, pumping, and transmission of crude petro- leum, petroleum products, fuel gases, carbon dioxide, nitro- gen and, where applicable, covers welding on distribution systems. It...
API RP 86 pdf download
API RP 86 pdf download.API Recommended Practice for Measurement of Multiphase Flow 1 Scope This API Recommended Practice arose from a series of meetings that were held during 2003 among measurement experts from several producers who were active offshore in the Gulf of Mexico. This group, the Upstream Allocation Task Group, set out to address the general shortage of standards...
API Publ 4741 pdf download
API Publ 4741 pdf download.Collecting and Interpreting Soil Gas Samples from the Vadose Zone 2.2 Measured Soil Gas Profiles at Petroleum Hydrocarbon Impacted Sites To better illustrate the connection between the conceptual model shown in Figure 2-2 and measured vertical soil gas profiles, sample soil gas profiles are shown in Figure 2-3 and Figure 2-4. Each of these profiles is...
API Publ 4734 pdf download
API Publ 4734 pdf download.Modeling Study of Produced Water Release Scenarios A sensitivity analysis with over 2000 scenarios simulated shows that the initial depth of the produced water (spill height) and the chloride concentration of the brine has the greatest affect on ground water quality predictions. These two factors were combined into a single factor: chloride loading, or “Release Chloride...
API STD 612 pdf download
API STD 612 pdf download.Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. (See Annex B for a guide to steam turbine nomenclature.) 3.1 alarm point preset value of a measured parameter at which an alarm is actuated to warn of...
API MPMS 4.1 pdf download
API MPMS 4.1 pdf download.Manual of Petroleum Measurement Standards Chapter 4—Proving Systems 4.2 UNCERTAINTY LIMITS WITHIN THE HIERARCHY Each level within a hierarchy will include all the errors and uncertainties from the previous or higher levels of the hierar- chy. Therefore, uncertainties will always increase throughout each level of the hierarchy. Exact, defined, and rigorous pro- cedures must be developed...
API MPMS 2.8B pdf download
API MPMS 2.8B pdf download.Manual of Petroleum Measurement Standards Chapter 2—Tank Calibration 2.8B.1 Scope and Field of Application This recommended practice is intended as a guide for establishing reference gauge heights during calibration of marine tank vessels. In many cases this calibration is carried out by shipyard engineers who may not be fully familiar with petroleum measurement requirements nor the...
ANSI API RP 10B-5 pdf download
ANSI API RP 10B-5 pdf download.Petroleum and natural gas industries — Cements and materials for well cementing 5.3.2 Preparation of slurry 5.3.2.1 Mixing Test samples shall be prepared in accordance with ISO 10426-2:2003, Clause 5. The mixing device shall be calibrated annually to a tolerance of ± 3,3 r/s (200 r/min) at 66,7 r/s (4 000 r/min) and ± 8,3...
ANSI API RP 10B-5 pdf download
ANSI API RP 10B-5 pdf download.Petroleum and natural gas industries — Cements and materials for well cementing 4 Sampling 4.1 General Samples of the neat cement or cement blend, solid and liquid additives, and mixing water are required to test a slurry according to this part of ISO 10426. Accordingly, the best available sampling technology should be employed to ensure...