API SPEC 15HR pdf download
API SPEC 15HR pdf download.Specification for High Pressure Fiberglass Line Pipe 5.3 THREADED END CONNECTIONS 5.3.1 General Pipe shall be furnished as specified in the purchase order, with any of the following end finishes. a. Threaded and Coupled. b. Threaded Ends Without Couplings. c. Integral Joints. d. Alternate Pipe Thread. 5.3.2 Standard Thread Design a. Pipe threads shall conform to...
API Spec 15LR pdf download
API Spec 15LR pdf download.Specification for Low Pressure Fiberglass Line Pipe and Fittings 1 Scope 1.1 COVERAGE This speciÞcation covers Þlament wound (FW) and centrif- ugally cast (CC) Þberglass line pipe and Þttings for pipe in diameters up to and including 24 in. in diameter and up to and including 1000 psig cyclic operating pressures. In addition, at the manufacturerÕs...
API STD 660 pdf download
API STD 660 pdf download.Shell–and–Tube Heat Exchangers for General Refinery Services 1.1 SCOPE 1.1.1 This standard defines the minimum requirements for the mechanical design, material selection, fabrication, inspec- tion, testing, and preparation for shipment of shell-and-tube heat exchangers for general refinery services. 1.1.2 As used in this standard, the term heat exchangers includes heaters, condensers, coolers, and reboilers. 1.2 GENERAL...
API RP 49 RUSSIAN pdf download
API RP 49 RUSSIAN pdf download.Recommended Practice for Oil and Gas Well Drilling and Servicing Operations Involving Hydrogen SulÞde 1 Scope Recommendations set forth in this publication apply to oil and gas well drilling and servicing operations involving hydrogen sulÞde. These operations include well drilling, completion, servicing, workover, downhole maintenance, and plug and abandonment procedures conducted with hydrogen sulÞde present...
API SPEC 5D pdf download
API SPEC 5D pdf download.Specification for Drill Pipe 1 Scope 1.1 COVERAGE 1.1.1 This speciÞcation covers Group 1 and Group 3 drill pipe as described below in the designations and wall thick- nesses as shown in the standards list, Table 1, and in the dimen- sional tables (Table 7 and Table 8). The requirements of this speciÞcation apply to both...
Api Std 1160 pdf download
Api Std 1160 pdf download.Managing System Integrity for Hazardous Liquid Pipelines Integrity must be built into pipeline systems from initial planning, design, and construction. Integrity management of a pipeline starts with the sound design and construction of the pipeline. Guidance for new construction is provided in a number of consensus standards, including ASME B31.4, as well as the pipeline safety...
API RP 2001 pdf download
API RP 2001 pdf download.Fire Protection in Refneries 1 Purpose and Scope 1.1 Purpose The purpose of this recommended practice is to provide a better understanding of refnery fre protection and the steps needed to promote the safe storage, handling, and processing of petroleum and petroleum products in refneries. A basic premise of this standard is that fre prevention provides...
API RP 2021 pdf download
API RP 2021 pdf download.Management of Atmospheric Storage Tank Fires 1 General 1.1 PURPOSE This recommended practice provides experience-based information to enhance the understanding of fires in atmo- spheric storage tanks containing flammable and combustible materials. It presents a systematic management approach which can assist tank fire prevention. If fires do occur, this information can help responders optimize fire suppression...
API RP 14J pdf download
API RP 14J pdf download.Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities 1 General 1.1 PURPOSE The purpose of this recommended practice is to assemble into one document useful procedures and guidelines for plan- ning, designing and arranging offshore production facilities, and performing a hazards analysis on open-type offshore pro- duction facilities. This will promote safe, pollution...
API Std 653 pdf download
API Std 653 pdf download.Tank Inspection, Repair, AIlteration, and Reconstruction 1.1 INTRODUCTION 1.1.1 This standard covers carbon and low alloy steel tanks built to API Standard 650 and its predecessor API 12C. This standard provides minimum requirements for maintaining the integrity of welded or riveted, nonrefrigerated, atmospheric pressure, aboveground storage tanks after they have been placed in service. It covers...